bet 366 casino,inkhel.com fb,soccer boots

The extensometer models AE300 and AE500 are suitable for almost all samples with an initial gage length from 10mm. Their low clamping forces combined with high measurement accuracy makes them highly suitable even for small, notch sensitive test samples.
 
The AE series can be connected to partly or fully automatic testing machines and used with all types of grips. The strain can be measured from the elastic range to fracture for almost all types of samples. When used in combination with the transverse models, the AE extensometers are highly suitable for testing the deep-drawing properties of thin sheets.
 
The AE extensometers are controlled through bet 366 casino Olsen’s Horizon software via a serial interface (RS232 or USB). All movements can be initiated at any time required. The measuring arms can be positioned in parallel within the available interval under computer control and can therefore be quickly adjusted symmetrically to different sample lengths.

  • Two-sided measurement by means of four measuring sensors
  • Very high resolution of up to 0.1μm over the complete measuring range
  • Very low clamping forces allow testing of foils and thin wires
  • The round knife edges can be utilized along their entire perimeter by rotating them
  • The gage length position and value can be exactly set under computer control
  • tennisforum.gr

  • Measurement in compression or deflection: The AE models work in tension or compression, however, an optional module can be added that will allow the models to work in both directions.
  • Different lengths of measuring arms and higher travel available: Measuring arms of either an additional 75mm or 200mm length (additional to the standard length of 254mm) can be used to follow the specimen movement, allowing the extensometer to be used at a greater distance from the specimen.
  • The installation of a fan/ventilator for use in dusty/dirty environments: Any dirt or dust can play havoc with electronics and fine measuring systems, so putting the extensometer under a positive pressure prevents the ingress of dust and dirt.
  • wheel decide roulette

    Automated Tensile & Hardness System

    Automated Tensile System for Plastics

    Automated Impact System

    Automated Hardness System

    Automated Flex System

    Bollard Style Tensile Grips

    Vise Style Tensile Grips

    Pneumatic Style Tensile Grips

    Roller Style Tensile Grips

    Tensile Vise Grips

    Wedge Style Tensile Grips

    Hydraulic Tensile Grips

    Wedge Style Pocket Tensile Grip

    Suspended Tensile Test Grip

    Compression Test Attachment

    Flex Test Grips

    Peel Test Grips

    Friction Test Grip

    Shear Test Grip

    100S Extensometer

    100R Extensometer

    Strain Gage Type Extensometer

    500LC Laser Extensometer

    LVDT Type Extensometer

    VEM Software

    VEM 300 Series

    VEM 200 Series

    VEM 100 Series

    Non-Contact Video Extensometer

    Furnace

    Chambers

    Horizon Software

    DG Series CTM

    FA Series CTM

    Portable Compression soccer boots Machine

    Air Entrainment Meter Type B

    Air Entrainment Meter Type A

    Cast Iron Molds

    Compaction Factor Apparatus

    Core Case

    Pan Type Concrete Mixer

    Vibrating Table

    Vibration Machine

    Motorized Flow Table

    Accelerated Curing Tank

    Slump Cone Test

    Unconfined Compression Tester

    Consolidation Apparatus – Analog

    Consolidation Apparatus – Digital

    Plate Bearing Test Apparatus

    CBR Test Apparatus – Analog

    CBR Test Apparatus – Digital

    Direct Shear Test Apparatus

    Relative Density Apparatus

    Triaxial Cell

    Triaxial Data Acquisition System

    Pressure System

    De-aired Water Tank

    Triaxial Test Load Frame

    Point Load Index Tester

    Motorized Sieve Shaker

    Liquid Limit Device

    Automatic Soil Compactor

    Centrifuge Extractor

    Automatic Compactor for Bituminous Mixes

    Ring and Ball Apparatus

    Marshall Stability Test Machine – Analog

    Marshall Stability Test Machine – Digital

    Dynamic Cone Penetrometer

    Ductility soccer boots Machine

    Benkelman Beam

    Universal Penetrometer

    Aggregate Impact Tester

    Accelerated Polishing Machine

    Pulverizer

    Los Angeles Abrasion Tester

    Laboratory Ball Mill

    Jaw Crusher

    Mortar Mixer

    Cement Autoclave

    Flow Table

    Jolting Apparatus

    Auto Blaine Apparatus

    Hydrotracer Moisture Analyzer

    MIT Folding Endurance Tester

    AIM Quick Change Mold

    Wire Twister

    Torsion Tester

    Model IT800

    Model IT542

    Model IT406

    Model IT503/504

    Model FH12 Universal

    Model FH11 Universal

    Model FH14

    Model FH7

    Model FH6

    Model FH9

    Model FH31

    Model FH30

    Model FH12-38

    Model FH11-52

    Model FH1-7

    Model FH95

    Model HDT/Vicat

    Model MP1200

    MHT Series

    Model SL – Compression Only

    Model 3000SL

    Model 2000SL

    Model 1500SL

    Model 50ST

    Model 25ST

    Model 1ST

    Model 10ST

    Model 5ST

    Model 150SL

    Model 300SL

    Model 1000SL

    Model 600SL

    Model 150ST

    Model 300ST

    Model 100ST

    webmaps